I n n o v a t i v e   M a r i n e   P r o d u c t s   f o r   t h e   I n f o r m e d   S e a f a r e r   -   S i n c e  1 9 9 5

Toll Free USA and Canada 800-821-0207 M-F 9A-5P CST

Spade Anchor FAQ

Click Here to Order your Spade Anchor Now!
 (Pricing and Online Ordering Here)

1. Do you consider the SPADE anchor good for all bottom types?Spade Anchor Authorized Dealer

We can only say that the SPADE anchor will hold better than most models. In very soft mud, equivalent sized flat anchors with an opening angle of 45 degrees (between fluke and shank) will give better results – but only in this type of sea bottom. On the whole, we believe the SPADE to be the best all round anchor on the market. Some sea bottoms are more difficult than others: thick weed, shingle, boulders, or flat rock surfaces all make difficult bottoms for anchors.

2. Does the aluminum SPADE have the same holding as the steel version of the same size?

Holding power of an anchor has very little relation to its weight. Holding power has a much closer relation to the size, and the shape, of the effective surface area of the anchor’s blade. Because each model of our anchors will have the same effective surface area, whether made of steel or of aluminium, each anchor will have the same holding power. Several independent tests, by nautical magazines have confirmed that our aluminium anchors hold with exactly the same power as the steel version of the same size although it is important to note that we only recommend the use of an aluminium anchor as a secondary anchor.

3. How do you recommend I connect my anchor to my chain?

There are a large number of purpose built anchor connectors on the market, the majority of these are simply inadequate and are prone to failure.  They were originally designed to overcome the problems associated with using a normal shackle which tends to get caught on a bow roller during recovery.  If this is not likely to be a problem, we advise using a shackle of one size greater than that of the chain.

4. Does your aluminum model have the same weight distribution that your steel one?

All our models – steel, aluminium or stainless steel – are well balanced, with nearly 50% of the anchor’s total weight on its tip, giving the SPADE the best penetration qualities of the designs presently available.

5. Does the lighter weight of an aluminum SPADE mean that it will not penetrate as well as a steel version of the same size?

This is true; the model in steel will dig in slightly more readily than the equivalent aluminium version. However, due to its superior design (which gives 50% of the weight on the tip), an aluminium SPADE will have better penetration qualities than most other types of steel anchor of equivalent size (which, because of the materials, will be twice the weight of the aluminium SPADE). And we remind you that once set; the aluminium SPADE will have the same holding power as the steel SPADE. Both will be far superior to other types of anchor of equivalent size.

6. Do SPADE anchors fit bow rollers designed for “plough” anchors?

Yes, usually there are no problems. Click here to download a PDF file of a dimensions chart.

7. What type of aluminum are you using? Is it more prone to bending than steel?

We use a marine grade aluminium alloy, and its resistance is less than that of steel. Therefore, we use heavier grades to compensate. But, we will always suggest using the steel model as a main anchor and the aluminium one as a secondary to stern anchor.

8. Following your recommendation, what would be the best use of your aluminum model?

We will suggest our aluminium model as a secondary or stern anchor; or as a main anchor if your boat is a light weight catamaran; or if you are frequently racing; or if you have a large boat and no electric windlass.

9. Tunisia sounds like an odd country to operate from. Why do SPADE operate out of Tunisia?

SPADE is based in Tunisia for similar reasons that many North American industries base themselves in Mexico. Tunisia is an ex-French colony in North Africa. It is a stable state where labour rates are lower than in France, and bureaucracy is simpler. With its well developed infrastructure it is an ideal base from which French businesses launch new products into Europe – and to the world.

10. Yachting Monthly (2004) reported the loss of a New Zealand vessel apparently due to a problem with the SPADE anchor's shank bolt.  How do you explain this?

The New Zealand authorities investigated the case in order to prevent a similar case occurring.  Based on the account of the skipper, they concluded that they only possible explanation was that the nut somehow unscrewed itself and the bolt somehow dropped out.  They offered no explanation of how a nut specifically designed not to come undone could do so without any forces acting upon it.

They recommended a simple modification to the bolt to eliminate any possibility of the situation reoccurring. Despite doubts about the case Spade followed this advice.

During the investigation, no doubts were expressed about the general performance or design of the SPADE.  No similar cases have ever been reported despite thousands of anchors sold.  This was a new anchor in calm conditions and in our opinion it is extremely unlikely that the nut did unscrew itself from tight as described.


Additional Information

Spade Anchor Dimensions

Technical Details of the SPADE Anchor

Spade Anchors - Main Page

Click Here to Order your Spade Anchor Now! 
 (Pricing and Online Ordering Here)